PowerBus Digital Switching electrical system

[sp_grid span=one_half]PowerBus electrical system is a effective and adaptive power system for the boats all 12 volt electrical functions that is both quick and easy to install. You can customize it to suit your needs and the boat’s potential , it gives you full control over all electricity consumers.

PowerBus electrical system is a so-called “Digital Switching ” decentralized electrical systems for power distribution , which means that all electrical components are controlled through digital communication to modules located near the consumers , a conventional fuse panel is no longer needed . The system consists of one or more input modules (DSI ) and one or more output modules ( DSOs) . The modules are connected to each other with four standard wires provided with cable lugs screwed on screw terminals , no expensive special cables.

The control of the boat’s electrical consumers is done with existing carling switches , buttons, and dashboards that are connected to the input modules ( DSI) .
All modules have a LED indication of the status of the outputs.
Each output is equipped with an automatic fuse.

With PowerBus electrical system installed , it is very easy to configure each load and to expand the electric system with new features and components.

Any input on an input module can control up to eight outputs simultaneously on connected output modules . In an installation up to nine input modules , each with four inputs can be used and up to nine output modules , each with four outputs.

Maximum distance between the first and the last module is 250m.

Configuration is done either via an input module or from a configuration program on a connected PC / smartphone ( iOS , Android) . All modules come pre-configured, first input on the input module controls first output on an output module , etc.

[/sp_grid]

[sp_grid span=one_half last=true]

Wireless switch without battery

PowerBus DSI-WS receiver enables use of wireless switches in the PowerBus system which saves time and simplifies installation. The wireless switches is “self powered,” they need no external power supply to operate, the principle is that pressing the power button generates enough energy to transmit a radio signal to the receiver.

A single PowerBus DSI WS receiver can support up to eight switches where each switch can have up to four channels, and several DSI WS receiver modules can be installed in the same system.
This provides a very simple switch installation without the need for cables to an input module, install it only on one wall (indoors or outdoors), pair it with the nearest DSI WS receiver and start using it.
New switches is automatically paired to the system as they are maneuvered the first time. It is very easy to change or add a wireless switch to an existing installation.

EnOcean is the originator of this technology for the wireless switch, for more information visit www.enocean.com . A number of manufacturers of switches using this technology and their products are compatible with PowerBus DSI-WS, for more information visit

EnOcean is the originator of this technology for the wireless switch, for more information visit www.enocean.com. A number of manufacturers of switches is using this technology and their products are compatible with PowerBus DSI-WS, for more information visit www.enocean-alliance.org/en/products/.

[/sp_grid]

[sp_grid span=one_half]

PowerBus DSI-4

Ingångsmodul med fyra anslutningar för befintliga strömbrytare
och indikatorlampor (max 100mA/12V).

pris inkl. 25% moms 1295,00 kr. [sp_button title=” köp” color=hazel target=same url=”http://www.safeportmarine.se/powerbus-dsi-4/” type=”normal”]

[/sp_grid]
[sp_grid span=one_half last=true]

PowerBus DSI-WS

Ingångsmodul för trådlösa strömbrytare med EnOcean teknik.

pris inkl. 25% moms 1995,00 kr. [sp_button title=” köp” color=hazel target=same url=”http://www.safeportmarine.se/powerbus-dsi-ws/” type=”normal”]
[/sp_grid]

[sp_grid span=one_half]

PowerBus DSO-4

Utgångsmodul med fyra utgångar för anslutning till elförbrukare,
varje utgång kan lämna 3A vid 12V.
Modulen är lämplig för förbrukare som drar liten mindre ström.

pris inkl. 25% moms 1295,00 kr. [sp_button title=” köp” color=hazel target=same url=”http://www.safeportmarine.se/powerbus-dso-4/” type=”normal”]

[/sp_grid]

[sp_grid span=one_half last=true]

PowerBus DSO-4P

Utgångsmodul med fyra utgångar för anslutning till elförbrukare,
varje utgång kan lämna 7A vid 12V.

Utgångarnas strömförbrukning är övervakad.

pris inkl. 25% moms 1995,00 kr. [sp_button title=” köp” color=hazel target=same url=”http://www.safeportmarine.se/powerbus-dso-4p/” type=”normal”]

[/sp_grid]